Home
(877) 291-0363
Welcome to Hot Rod Hardware

FiTech Meanstreet 800 HP EFI System Master Kit-Matte Black


From FiTech Fuel Injection

FiTech Meanstreet 800 HP EFI System Master Kit-Matte Black

Meanstreet offers an onboard ECU and fuel pressure regulator to bring the user simple, clean wiring and an easy install. The FiTech wideband 02 and Annular Swirl Wet Flow technology to get the most complete atomization available, bringing the user more power than ever. Using FiTech’s proprietary self-tuning techology, you can get your car on the road or track faster than ever, using just your gas pedal and the included handheld controller to make it all happen. MeanStreet EFI fits any 4 barrel intake manifold, and is the most self contained, cost effective unit on the market.

It fits any 4-bbl intake manifold and is the most self-contained and full-featured unit of this type. The ECU (computer) is mounted on the throttle body, which greatly simplifies installation. No hole in your firewall and no unsightly harness draped across your engine. It also has a built-in fuel pressure regulator. A hand-held controller features a touch screen for quick and easy initial set-up.

The FiTech Fuel Command Center Assembly is mounted in your engine compartment. It can also be mounted anywhere on the vehicle’s chassis if necessary. The conventional fuel line that originally went to your carburetor is connected to the “IN” port of the Fuel Command Center. A supplied high pressure hose is plumbed from the Command Center to the inlet port on your EFI throttle body.

Kit Includes: 

 Blacked out Die Cast Throttle body 
 Altitude compensation
 Windshield Mount
 (8) Hi-Flow 800 HP injectors 
 Built-in pressure regulator
 Internal MAP Sensor
 Throttle Position Sensor
 Idle Air Control Sensor
 Coolant Temp Sensor
 Wide band O2 Sensor
 O2 Bung Kit
 -06AN Fuel Inlet Fittings
 1 fan control adjustable from controller 

 

Hyperfuel G-Surge Tank Hyperfuel G-Surge Main Assembly
Hy-Fuel In-Tank Module  Hy-Fuel Pump Main Assembly
 58 PSI Fuel Regulator
 Extension Shaft
 Hy-Fuel Outer Ring (Red)
 Hy-Fuel Inner Ring (Black)
 340 L/PH Fuel Pump
 (16) #10-32×1″ Flat Head Machine Screws
 (8) #10-32×1.75″ Flat Head Machine Screws
 (8) #10-32×1.5″ Flat Head Machine Screws
 (8) #10-32 Keps Nuts and #10 Flat Washers
 EFI Grade 5/16″ Hose and (2) Hose Clamps
 (3) Electrical Connectors, Nuts, Washers and Rubber Boots
 OEM Style Filter
 1/4″ Drill Bit
 O-ring
Hy-Fuel Tight-Fit In-Tank Module Hy-Fuel Pump Main Assembly
 Return Tube
 Foam Gasket
 Hy-Fuel C Ring (Red)
 255 L/PH Fuel Pump
 (6) M5-0.8x25mm Hex Head Machine Screws
 (6) M5-0.8x25mm Countersunk Head Machine Screws
 (6) M5-0.8 Keps Nuts
 EFI Grade 5/16″ Hose and (1) Hose Clamp
 (2) Electrical Connectors, Nuts, Washers and Rubber Boots
 Filter Sock
 (2) Cable Clamps

 

 Only  $1,444.00
FIT 34008
Description:
Meanstreet EFI System Master Kit w/ Hy-Fuel In-Tank Module-Matte Black
Quantity:
 Only  $1,314.00
FIT 38008
Description:
Meanstreet EFI System Master Kit w/ Hy-Fuel Tight-Fit In-Tank Module-Matte Black
Quantity:
 Only  $1,394.00
FIT 33008
Description:
Meanstreet EFI System w/ Hyperfuel G-Surge Tank-Matte Black
Quantity:
HOT ROD HARDWARE
(877) 291-0363 Toll Free
(507) 527-1020 Local
Follow Us!
Ebay Facebook Hub Garage Twitter