Street Rod Style A/C & Alternator Bracket
From Alan Grove Components
Part #'s 101R-A.C & 201L-Alt. Shown
With the increasing use of long water pumps on modified vehicles these are very popular. Bolt to the top water pump and the two front intake bolts. May be used individually or as a pair. Will clear tall valve covers. NO DRILLING OR TAPPING REQUIRED. A hole is provided in the A.C. bracket for a heater hose. Will Not Work With Vortec Heads
Similar to the 101R and 201L, these brackets move the compressor forward and the alternator out to clear multiple carbs, etc. The compressor belt runs in the groove normally used by the alternator and vice versa.Will Not Work With Vortec Heads
A very versatile street rod style bracket system. Works well with most induction systems. Will clear multiple carbs, fuel injection, etc. Bolts to the head and top water pump bolt holes. The alternator bracket will fit all 1969 and newer heads. The A.C. Compressor bracket fits all G.M aluminum heads including the fast-burn aluminum heads and may be used on 1969 thru 1986 cast iron heads by drilling and tapping one hole for the upper mounting point. Will clear up to 3 in. tall center bolt valve covers when used on 1987 and later heads. Will clear up to 3 3/4 in. tall valve covers when used on 1986 and earlier heads.
These brackets are designed for 1987 and later cast iron heads including the popular VORTEC heads. VORTEC heads use 5/16" intake bolts that point straight down. Will clear valve covers up to 3 in. tall.
This bracket system is similar to our 130R and 230L, but sits about 1 in. higher to clear valve covers up to 4 1/2 in. tall when used with 1986 or earlier heads. Bolts to the heads and water pump. When the A.C. Compressor bracket is used on heads with one bolt hole, they will require drilling and tapping one hole for the upper mounting point.